electric cub motorcycles the clutch when starting

Torque called torque is the torque for rotating the shaft in a common unit XXX torque is kg-m, (international units are Nm). To better understand the concept of torque, for example, electric cub motorcycles bes tmotorcycle engine the following few examples: Use a screwdriver or wrench to tighten the screws, screwdriver or wrench if the words in length 1m, at one end of a screwdriver or wrench plus 1kg of force, the screw tightening torque to 1kg-m. If the screwdriver or wrench length of 0.5m, then, in order to obtain 1kg-m torque, the force applied must 2kg. vice versa, if the same driving torque, the farther the distance from the rotational center position, wave125 motorcycle resulting The smaller force. riven sector gear shift lever kick starter ratchet clutch assembly sprockets, front chain sprocket drive crank crankshaft rotation, start the engine. When the engine is started, the ratchet effect by starting a single acting and spring return mechanism to restore the original position of the starter. This starting mechanism, the starter lever when starting appropriated neutral position, depress the pedal to start. Another pedal rod to start introducing some models starting mechanism used. Unlike its predecessor, electric cub motorcycles the clutch when starting first clenched hand, street motorcycle disengage the clutch, shift lever position can be placed on any level, do not have to be placed in neutral, release the clutch after starting, the throttle can be started. When the pedal is depressed the start lever, start kicking in the ratchet pawl lever shaft and start kicking transmission gear lever engages make transmission gears, the idler gear, driven gear, clutch gear, crankshaft rotation starter pinion drive start the engine. After starting, the starting left foot pedal lever, the return spring so that the reverse rotation of the pedal lever, the pawl out of engagement with the ratchet teeth, to restore the original position.